Mesh belt conveyor dryer

The mesh belt dryer is a kind of drying equipment for batch and continuous production. The main heating methods are electric heating, steam heating and hot air heating. The main principle is that the material is evenly laid on the mesh belt, the mesh belt uses 12-60 mesh steel wire mesh belt, driven by the transmission device in the dryer to move back and forth, hot air flowing through the material, steam discharged from the dehumidification hole, so as to achieve the purpose of drying, the length of the box is composed of standard section, in order to save space. The dryer can be made into a multi-layer dryer. The common dryers are two rooms, three layers, two rooms and five layers, with a length of 6-40m and an effective width of 0.6-3.0m.
   

Know more about Fodamon Mesh belt conveyor dryer

1. Quality materials. Small investment, fast drying speed, high evaporation intensity, high efficiency, large yield and good product quality.
2. Parts wear minimization. Standardized production, according to the output of the increase in the number of stages, can adjust the air volume, heating temperature, material residence time and feeding speed to achieve the best drying effect, flexible equipment configuration, the use of mesh belt flushing system and material cooling system.
3. Material throughput is improved. Most of the air recycling, highly energy-saving, unique air distribution device, so that the hot air distribution more uniform, to ensure the consistency of product quality.
4. Special structure saves labor and labor. The heat source can be matched by steam, heat conducting oil, point or gas hot stove.

Working principle

The mesh belt dryer distributes the material to be processed on the conveyor belt through a suitable paving mechanism, such as a star-shaped distributor, swing belt, crusher or granulator. The conveyor belt passes through a passage composed of one or more heating units. Each heating unit is equipped with an air heating and circulating system. Each passage has one or more heating units. Several dehumidification systems, in the conveyor belt through, hot air from the top down or from the bottom up through the conveyor belt material, so that the material can be evenly dried.

Technical data

Model

202

204

304

306

Effective working length of monolayer (m)

20

20

30

30

Number of layers (n)

2

4

4

6

Effective working width (m)

1.2

1.2

1.5

1.5

Average stacking thickness of materials (mm)

200

Drying capacity(t/h)

6

10

15

20

Moisture content before drying (%)

8-12%

8-12%

8-12%

8-12%

Moisture content after drying (%)

1.5-3%

1.5-3%

1.5-3%

1.5-3%

Transfer power (kw)

3

3×2

5.5×2

5.5×3

Hot air temperature requirements (℃)

180-250

Hot air content requirement (kg/kg)

≤0.01kg/kg Dry air

Note: This is just reference. Please contact us to get price and details.